Mini Off Road Forklift,Front End Forklift,Small Diesel Forklift

English

Phone +8613646031950 / +8618030145661
Email juju@interquip.cn / derek@interquip.cn

News

How do I access the error codes stored on my forklift? Sep 20 , 2023
How do I access the error codes stored on my forklift? Some series of all terrain forklifts can memorize the last 24 error codes. Helps a lot when the forklift is having intermittent problems and the operator doesn't remember which code appears on the display. Moreover, by analyzing the contents of the last 24 error codes, it is possible to determine what work the counterbalance lift truck has don...
Read More
How to Install the Forklift Control Panel? Aug 09 , 2023
How to install the 16 ton forklift control panel? 1. Use a small amount of heat transfer compound on control panels and mating surfaces prior to assembly. 2. Use sealant on all screw threads used to reinforce parts on the control panel. 3. Use sealant on the screws used to tighten the positive and negative fins on the control panel to a torque of 10-14N.M, 90-125ib.in. 4. Tighten the nuts and scre...
Read More
Forklift Chassis Resistance Inspection and Maintenance Jul 17 , 2023
Rough Terrain Forklift chassis resistance inspection and maintenance 1. Chassis resistance inspection. The resistance of any part between the forklift wiring and the chassis should be at least 1000 ohms. Many failures are caused by chassis short circuits. Usually, there are two faults before a fault occurs. However, since the battery can have chassis leaks, even a single short in the forklift wiri...
Read More
How to adjust the height of forklift fork and mast Jul 05 , 2023
How to adjust the height of counterbalanced diesel forklift fork and mast 1. Move the mast so that the rear is fully tilted. 2. Completely lower the fork. Bottom yoke bearings, forklift bearings. 3. For the full free lift and full free triple lift models, the bottom of the inner mast must be as high as the bottom of the fixed mast. 4. Measure the distance from the bottom of the inner column to the...
Read More
How to remove the forklift counterweight and instrument frame? Jun 15 , 2023
How to remove the diesel rough terrain forklift counterweight and instrument frame? 1. Counterweight. 1. Remove the battery cover of the forklift. 2. Remove the top protection frame assembly. 3. Remove the forklift battery from the forklift. 4. Open the counterweight cover, lift the center of gravity, and then remove the counterweight cover. 5. Remove the wiring and cables connected to the control...
Read More
Disassembly and decomposition steps of forklift oil pump Jun 09 , 2023
Disassembly and decomposition steps of 3 tons diesel forklift oil pump 1. Disassembly steps. 1. Remove the lower cover, and clean and remove dust around the oil pump. 2. Cut off the oil inlet hose and drain the oil in the oil pump with a pipe. It should be noted that the oil tends to overflow, and the pipe should be covered with a rag, and the oil inlet hose should be clamped with a clamp to preve...
Read More
How to remove the forklift body and frame? May 08 , 2023
First, the operator seat. 1. Open the battery cover and lock it tightly. 2. Remove the nut from the back of the battery cover of the sit down counterbalance forklift, and then remove the operator's seat. Be careful not to drop the operator's seat during the removal process. Second, the forklift battery cover. Please note that assistance is required when removing the battery cover. When opening or ...
Read More
Reasons and Solutions for Heavy Steering of Forklifts Apr 14 , 2023
The reasons and troubleshooting methods of diesel forklift truck turning heavy, shared with you by Xiamen Interquip Machinery Co.,Ltd. Fault phenomenon: When the forklift turns left or right, it feels heavy and laborious to turn the steering wheel. cause of issue: 1. The upper and lower bearings of the steering screw are adjusted too tightly or the bearings are damaged. 2. The adjustment of the me...
Read More

1 ... 4 5 6 7 8 ... 15

[ A total of 15 pages]