Mini Excavator

0.9 / 900 kg Home / Farm / Garden New Smallest Mini Electric Hydraulic Pump Crawler Battery Digger Excavator for Sale Feature 1. Easy to operate, easy to operate device, in line with the new generation of ergonomics 2. Pure electric environmental protection design, its performance and noise have reached the highest level in Europe. 3. The reinforced track effectively enhances the wear resistance of the track and prolongs the service life of the track 4. Reasonable hydraulic layout greatly facilitates the inspection and maintenance of the hydraulic system. 5. Precise intelligent instrument. Specification Model E10  Electric Systems Baterry type  Li-ion battery pack Baterry capacity kW.h 7.68 System voltage v 51.2 Indicative runtime (typical duty cycle) hrs 4.5 Charging On-board charger Indicative charge time (on-board) hrs 8 @110v / 6@ 220v Off-board fast charge (optional) hrs 2@220 Motor type AC  Motor power (continuous / peak) HP (kw) (4/8) Operating Performance Operating weight  lb (kg) 2101(953) Standard bucket capacity cu.ft (cu.m) 0.78 (0.022) Max. arm digging force lb (kg) 1201(545) Max. bucket breakout force lb (kg) 1411(640) Max. traction force lb (kg) 1345(610) Max.boom cylinder lifting force lb (kg) 584(265) Unit swing speed rpm 8 *Boom swing angle left/right degree 65/55 Drive Performance Max travel speed mph (km/h) 1.24(2) Ground contact pressure psi (kpa) 4.35（30） Track type Rubber Gradeability % 30 Hydraulics Total hydraulic flow gal/min (L/min) 4.75（18） Max. operating pressure psi (mpa) 2610(18) Reservoir capacity gal (ltr) 3.17(12) Dimensions A   Overall transportation length ft. in. (mm) 8'9''(2720) B   Overall transportation width  ft. in. (mm) 2'8''(875) C   Overall transportaion height ft. in. (mm) 6'8''2077 D   Standard Width of bottom chassis ft. in. (mm) 2'7''(835)      * max.extend  ft. in. (mm) 3'2''(960)      * min. retract  ft. in. (mm) 2'5''(760) E   Track width  ft. in. (mm) 2'2''(657)       Rubber width in. (mm) 5.9''(180) F    *Tops canopy  max. height ft. in. (mm) 7'1''(2160)       *Rops canopy max.height ft. in. (mm) 7'0''(2140)       *Rops canopy min.height ft. in. (mm) 5'2''(1585) G   Max. digging height ft. in. (mm) 8'2''(2490) H   Max. dump height ft. in. (mm) 6'0''(1842) I     Max.diging depth ft. in. (mm) 5'6''(1720) J    Max. vertical dig depth ft. in. (mm) 5'3'' (1600) K   Max. digging radius @groud ft. in. (mm) 9'5''(2900) L    Maximum reach  ft. in. (mm) 9'8''(3000) M   blade Max. lift above ground in. (mm) 4.7''(120) N   blade Max. drop below ground in. (mm) 9.8''(250) O   Min. turning radius  ft.in. (mm) 4'5''(1380) P   Front transportation length ft. in. (mm) Q  Rear tansportation length ft. in. (mm) 2'4''(725) R  Left Horizontal distance ft. in. (mm) 1'4''(410) S  Right Horizontal distance ft. in. (mm) 1'6''(480) T  Min. tail turning radius ft. in. (mm) 2'8''(846) Note: 1.Operating weight includes 75kg driver weight and other optional parts. 2.Size with * is optional 3.The company reserves the right to change specifications without notice. This brochure is for descriptive purposes only. 4.For your safety, we strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt for almost all applications.

Hydraulic 8 Ton Crawler Excavator with Break Machine Parts *High-end first-class core configuration Yanmar engines comply with Stage III emissions, saving energy and fuel. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Highly rigid new cab, quiet and comfortable Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 80.9 Operating weight  Ton 8.2 Bucket capacity  m³ 0.32 Engine model YANMAR 4TNV98T YANMAR 4TNV98 Rated power  kw/r/min 56.5/2200 46.3/2200 Volume of fuel tank  L 130 Travel speed  km/h 5.1/2.7 Swing speed r/min 10 Max climbing degree ° 70 Bucket digging force at power max ISO KN 52 Average grounding pressure KPA 30 Hydraulic pump model   InLine  HP3V80 Maximum flow  L/min 165 Setting pressure  MPa 32 Volume of hydraulic tank  L 90 A  Overall length  mm 6100 B  Overall width  mm 2300 C  Overall height （to top of boom） mm 2515 D  Overall height （to top of cab） mm 2680 E  Counterweight ground clearance mm 760 F  Min. ground clearance   mm 380 G  Tail swing radius  mm 1755 H  Track grounding length  mm 2150 J  Track length  mm 2760 K  Track gauge mm 1700 L  Track width  mm 2150 M  Track shoe width  mm 450 N  Turntable width  mm 2198 O  Max. digging height  mm 7165 P  Max. dumping height mm 5065 Q  Max. digging depth mm 4038 R  Max. vertical wall digging depth  mm 3505 S  Max. digging depth for 2.5m horizontal plane  mm 3680 T  Max. digging reach  mm 6330 U  Max.digging reach at ground level  mm 6180 V  Min. swing radius   mm 1795 W  Max. height at min swing radius  mm 5500 X Distance from swing center to rear mm 1755 Z  Height of counterweight  mm 1725 A1 Grounding length (in transportation)  mm 3700 Arm length mm 1650 Boom length mm 3710

20 Ton Backhoe Excavator Long Reach Compact Excavator *High-end first-class core configuration Yanmar engines comply with Stage III emissions, saving energy and fuel. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Highly rigid new cab, quiet and comfortable Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 205.9 Operating weight Ton 21.3 Bucket capacity  m³ 0.93 Engine model 广康QSB7.0 三菱 4M50 Rated power  kw/r/min  124/2000  118/2000 Volume of fuel tank L 420 Travel speed km/h 5.2/3.5 Swing speed r/min 11.5 Max climbing degree ° 70 Bucket digging force at power max   ISO KN 157 Average grounding pressure KPA 46.5 Hydraulic pump model EDDIE FMP112APDT  KPM K3V112DT Maximum flow  L/min 215*2 228*2 Setting pressure  MPa 37 Volume of hydraulic tank  L 246 A  Overall length  mm 9560 B  Overall width mm 2780 C  Overall height （to top of boom） mm 3040 D  Overall height （to top of cab） mm 3120 E  Counterweight ground clearance  mm 1065 F  Min. ground clearance   mm 466 G  Tail swing radius  mm 2720 H  Track grounding length mm 3260 J  Track length  mm 4060 K  Track gauge mm 2180 L  Track width  mm 2780 M  Track shoe width  mm 600 N  Turntable width mm 2700 O  Max. digging height mm 9275 P  Max. dumping height  mm 6560 Q  Max. digging depth  mm 6515 R  Max. vertical wall digging depth  mm 5915 S  Max. digging depth for 2.5m horizontal plane mm 6380 T  Max. digging reach mm 9865 U  Max.digging reach at ground level   mm 9680 V  Min. swing radius  mm 3630 W  Max. height at min swing radius  mm 7670 X Distance from swing center to rear  mm 2720 Z  Height of counterweight  mm 2120 A1 Grounding length (in transportation)  mm 4850 Arm length mm 2900 Boom length mm 5700

Earth-Moving Machinery 22 Ton New Excavator *High-end first-class core configuration Yanmar engines comply with Stage III emissions, saving energy and fuel. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Highly rigid new cab, quiet and comfortable Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 215.9 Operating weight  Ton 22.5 Bucket capacity  m³ 0.93 Engine model 三菱4M50 Rated power  kw/r/min  118/2000 Volume of fuel tank L 420 Travel speed  km/h 5.2/3.5 Swing speed r/min 11.5 Max climbing degree ° 70 Bucket digging force at power max  ISO KN 157 Average grounding pressure KPA 48 Hydraulic pump model   InLine  V90N130 Maximum flow  L/min 222*2 Setting pressure MPa 37 Volume of hydraulic tank L 246 A  Overall length mm 9560 B  Overall width mm 2980 C  Overall height （to top of boom） mm 3040 D  Overall height （to top of cab） mm 3120 E  Counterweight ground clearance  mm 1065 F  Min. ground clearance   mm 466 G  Tail swing radius mm 2720 H  Track grounding length  mm 3260 J  Track length mm 4060 K  Track gauge mm 2380 L  Track width  mm 2980 M  Track shoe width mm 600 N  Turntable width  mm 2700 O  Max. digging height mm 9275 P  Max. dumping height mm 6560 Q  Max. digging depth  mm 6515 R  Max. vertical wall digging depth mm 5915 S  Max. digging depth for 2.5m horizontal plane  mm 6380 T  Max. digging reach mm 9865 U  Max.digging reach at ground level  mm 9680 V  Min. swing radius   mm 3630 W  Max. height at min swing radius mm 7670 X Distance from swing center to rear mm 2720 Z  Height of counterweight  mm 2120 A1 Grounding length (in transportation) mm 4850 Arm length  mm 2900 Boom length  mm 5700

Brand New 22.8 ton 133kw Hydraulic Crawler Excavator *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 220.9 Operating weight  Ton 22.8 Bucket capacity  m³ 1.0 Engine model 五十铃4HK1X 康明斯QSB7.0 Rated power  kw/r/min  133/2000 124/1800 Volume of fuel tank  L 420 Travel speed  km/h 5.2/3.5 Swing speed r/min 11.5 Max climbing degree ° 70 Bucket digging force at power max  ISO KN 157 Average grounding pressure KPA 46.5 Hydraulic pump model     InLine V90N130  KPM 3V112DT Maximum flow  L/min 250*2 228*2 Setting pressure  MPa 37 Volume of hydraulic tank  L 246 A  Overall length mm 9560 B  Overall width mm 2980 C  Overall height （to top of boom） mm 3040 D  Overall height （to top of cab） mm 3120 E  Counterweight ground clearance mm 1065 F  Min. ground clearance   mm 466 G  Tail swing radius mm 2720 H  Track grounding length  mm 3445 J  Track length mm 4260 K  Track gauge mm 2380 L  Track width  mm 2980 M  Track shoe width mm 600 N  Turntable width mm 2700 O  Max. digging height mm 9275 P  Max. dumping height mm 6560 Q  Max. digging depth  mm 6515 R  Max. vertical wall digging depth mm 5915 S  Max. digging depth for 2.5m horizontal plane  mm 6380 T  Max. digging reach  mm 9865 U  Max.digging reach at ground level  mm 9680 V  Min. swing radius   mm 3630 W  Max. height at min swing radius mm 7670 X Distance from swing center to rear  mm 2720 Z  Height of counterweight  mm 2120 A1 Grounding length (in transportation) mm 4850 Arm length mm 2900 Boom length  mm 5700

Construction New Manufacture Custom 24 Tons Hydraulic Mining Diggers *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 240.9 Operating weight  Ton 24 Bucket capacity  m³ 1.2 Engine model  康明斯QSB7.0 Rated power kw/r/min  142/1950 Volume of fuel tank L 420 Travel speed  km/h 5.2/3.5 Swing speed r/min 11 Max climbing degree ° 70 Bucket digging force at power max ISO KN 172 Average grounding pressure KPA 49.4 Hydraulic pump model KPM  K3V112DT Maximum flow  L/min 228x2 Setting pressure  MPa 37 Volume of hydraulic tank  L 246 A  Overall length mm 9850 B  Overall width mm 2980 C  Overall height （to top of boom） mm 3190 D  Overall height （to top of cab） mm 3120 E  Counterweight ground clearance mm 1065 F  Min. ground clearance   mm 440 G  Tail swing radius mm 2810 H  Track grounding length  mm 3640 J  Track length mm 4450 K  Track gauge mm 2380 L  Track width mm 2980 M  Track shoe width mm 600 N  Turntable width  mm 2700 O  Max. digging height mm 9310 P  Max. dumping height  mm 6440 Q  Max. digging depth mm 6875 R  Max. vertical wall digging depth  mm 5860 S  Max. digging depth for 2.5m horizontal plane mm 6680 T  Max. digging reach  mm 10170 U  Max.digging reach at ground level  mm 9990 V  Min. swing radius  mm 3975 W  Max. height at min swing radius mm 7775 X Distance from swing center to rear  mm 2810 Z  Height of counterweight  mm 2120 A1 Grounding length (in transportation)  mm 5360 Arm length  mm 3050 Boom length  mm 5850

New Manufacture 27 Tons Backhoe Hydraulic Mining Hole Track Crawler Diggers Excavator *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 270.9LC Operating weight  Ton 27.5 Bucket capacity  m³ 1.3 Engine model 康明斯QSB7.0 Rated power  kw/r/min 169/2050 Volume of fuel tank L 420 Travel speed  km/h 4.1/2.5 Swing speed r/min 10.5 Max climbing degree ° 70 Bucket digging force at power max  ISO KN 172 Average grounding pressure KPA 56 Hydraulic pump model KPM K3V112DT Maximum flow  L/min 228*2 Setting pressure  MPa 37.3 Volume of hydraulic tank  L 246 A  Overall length  mm 10000 B  Overall width  mm 3190 C  Overall height （to top of boom） mm 3325 D  Overall height （to top of cab） mm 3220 E  Counterweight ground clearance  mm 1080 F  Min. ground clearance   mm 520 G  Tail swing radius  mm 2910 H  Track grounding length  mm 3715 J  Track length mm 4625 K  Track gauge mm 2590 L  Track width mm 3190 M  Track shoe width  mm 600 N  Turntable width  mm 2700 O  Max. digging height mm 9310 P  Max. dumping height  mm 6440 Q  Max. digging depth mm 6875 R  Max. vertical wall digging depth  mm 5860 S  Max. digging depth for 2.5m horizontal plane mm 6680 T  Max. digging reach mm 10170 U  Max.digging reach at ground level   mm 9990 V  Min. swing radius  mm 3975 W  Max. height at min swing radius  mm 7835 X Distance from swing center to rear  mm 2910 Z  Height of counterweight  mm 2165 A1 Grounding length (in transportation)  mm 5360 Arm length  mm 3050 Boom length mm 5850

 Heavy Duty Equipment Brand New 35 Tons Heavy Excavator *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications 规格型号 Model  ITQ 360.8 斗容Bucket capacity (m3) m³ 1.6/1.8 整机总质量Operating weight (T) kg 35000 油箱容积 Volume of fuel tank (L) L 595 发动机Engine 品牌型号 Brand Dongfeng Cummins 6LTAA8.9 ISUZU 6HK1X 功率Rated power (kw/r/min) kw/rpm 242/2000 190.5/2000 进气方式Intake mode 涡轮增压Turbocharged 燃油系统工作方式Fuel system mode 直喷Direct injection 排放标准Emission standard 欧ⅡEuro II 底盘Chassis 驱动方式Drive mode 液压Hydraulic 主泵Main pump 品牌型号Brand KPM  K5V160DT 额定压力Rated pressure Mpa 37 流量Flow L/min 320×2 回转马达Swing motor 品牌型号Brand InLine  HM5X180CHB 工作压力Rated pressure MPa 26.5 行走马达Travel motor 品牌型号Brand KYB RT60T/HYUNDAI HT33A 工作压力Rated pressure MPa 34.3 主控阀Control valve 品牌型号Brand InLine  HVME270B                           额定流量Rated flow L/min 300 制动形式Brake form 液压Hydraulic 液压油Hydraulic oil 标号及用量Model and dosage Kg HM046/310 底盘件Chassis parts 履带形式-Track form 三齿Three teeth 履带板宽度Track width ㎜ 600mm 履带板数量No. of track 件 每侧  49(Each side) 履带接地比压Average grounding pressure(KPa) KPa 67.8 支重轮数量No. of track rollers 件 每侧 9(Each side) 性能参数Performance parameter 爬坡能力Max climbing degree° 度 35 行驶速度Travel speed  km/h 3.3/5.2 最大挖掘深度Max. digging depth mm 7370/6890 最大挖掘半径 Max. digging radius mm 11100/10800 最大卸载高度Max. dumping height  mm 7135/6830 最大挖掘高度Max. digging height mm 10200/9800 铲斗挖掘力Bucket digging force kN 227 回转速度Swing speed r/min 10.6 电器Electric appliance 电气系统厂家Manufacturer 临沂科锐KERUI(China) 仪表显示Monitor GPS终端GPS

36.8 Tons Crawler Excavator 1.6-1.8 cbm Bucket Capacity Excavator with Rubber Track *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications  MODEL Unit ITQ 385.9 Operating weight Ton 36.8 Bucket capacity  m³ 1.6-1.8 Engine model 五十铃6HK1X Rated power kw/r/min 212/2000 Volume of fuel tank L 595 Travel speed  km/h 5.2/3.3 Swing speed r/min 8.5 Max climbing degree ° 70 Bucket digging force at power max  ISO KN 256 Average grounding pressure KPA 70.8 Hydraulic pump model InLine V90N180/ KPM K5V160DT Maximum flow  L/min 360x2/320x2 Setting pressure MPa 37 Volume of hydraulic tank L 310 A  Overall length  mm 11150 B  Overall width mm 3190 C  Overall height （to top of boom） mm 3280 D  Overall height （to top of cab） mm 3280 E  Counterweight ground clearance  mm 1210 F  Min. ground clearance   mm 495 G  Tail swing radius  mm 3420 H  Track grounding length  mm 4030 J  Track length mm 4955 K  Track gauge mm 2590 L  Track width mm 3190 M  Track shoe width mm 600 N  Turntable width mm 2995 O  Max. digging height mm 9800 P  Max. dumping height mm 6830 Q  Max. digging depth mm 6890 R  Max. vertical wall digging depth  mm 6000 S  Max. digging depth for 2.5m horizontal plane  mm 6800 T  Max. digging reach  mm 10800 U  Max.digging reach at ground level   mm 10600 V  Min. swing radius mm 4285 W  Max. height at min swing radius  mm 8500 X Distance from swing center to rear mm 3420 Z  Height of counterweight  mm 2265 A1 Grounding length (in transportation) mm 5950 Arm length  mm 2900 Boom length  mm 6470