Winter is coming, and the weather is getting colder every day. I believe that many old drivers have encountered the problem of difficult ignition of small  wheel loaders and cutting machines in winter. The following will give you some knowledge in advance to prevent the use of small loading and cutting machines in winter. , After using unclean fuel, some non-combustible colloids will remain in the diesel. When impurities accumulate in the combustion chamber, it will cause difficulty in starting in winter, or even no fire. Solution: Drop some engine oil into the combustion chamber, start it normally, after starting, go to the service station for cleaning without disassembly. In severe cases, remove and clean the cylinder head. The fuel supply and power supply of the small loader are normal, but it will not catch fire.

When the frequency of use of the small loader is very low, the water-filled gas after the combustion of the engine freezes at the exhaust pipe, which affects the long-term emission of exhaust gas and cannot be seriously started. The solution is very simple, put the small cutting machine in a dry and warm environment, and it can start naturally after freezing. If it is not completely resolved, you can run a little more, the heat of the exhaust will completely melt the ice and expel it.

Do your homework on the winter operation of the small loader in advance. Even if you encounter a small loader in winter, don’t panic, just follow the solution provided by the editor. If you can't solve it, don't dismantle it blindly, ask a professional to come and check it, excluding faults.