When choosing equipment and equipment confirmation, diesel forklift manufacturers need to conduct detailed on-site investigations on diesel forklift suppliers to ensure that the selected forklift fully meets the needs of the enterprise. Even after completing the analysis of the above steps, some models can meet the above requirements. At this time, pay attention to:

Depending on the model and working power, the number of forklifts required by the diesel engine and the number of drivers are different, the series of costs are also different.

When the loader is working in the warehouse, depending on the model, the required channel width is also different, and the lifting size is also different, resulting in changes in the warehouse layout, such as changes in the inventory of goods.

One, frame and guide frame belong to one kind.
There are no cracks in the sub-frames and guide wheels. The forklift and the gantry crane cooperate well and can slide on the gantry crane softly and stably without jamming. The guide surface of the guide beam should be smooth and smooth to ensure the lateral stability and reliability of the fork. The forks have plenty of strength and stiffness and work well with the guide beams. The auxiliary frame of the forklift frame generally needs to be installed with a freshly made flat frame to avoid complete deformation. The door frame, tilt cylinder, and forklift frame should be firmly connected, well matched, reliable locked, and flexible in rotation.
The mast of the forklift.

The forklift mast is an accessory of the forklift, and its mast generally adopts an overlapping structure. The inner and outer frames cooperate well, slide flexibly, and there is no stuck phenomenon. There are no cracks, defects that do not affect the strength and rigidity, and the deformation cannot exceed the design allowable value. The door frame must have deformation and welding desoldering, and the inner and outer door frames, auxiliary frames, and inner door frames should be relatively weak. The drum rotor should be flexible, the rollers and shafts will not be cracked or damaged, and the wear of the wheel grooves should not exceed 10% of the original size. The pulling force of the crane chain should be uniform without twisting and deformation, and the end connection should be firm. Do not increase the fit clearance between the connecting rod pin and the socket. It is necessary to rotate the sprocket elastically, and the depth of the groove cannot exceed 0.5mm of the original size. The sub-frame does not produce large deformation and open welding phenomenon.

Forklift rail wheel frame.

The guide wheel frame is installed correctly and firmly, and the pulleys and pulleys are free of cracks or defects. The wear of the groove wall of the grinding wheel should not exceed 10% of the original design thickness. Cooperate with the guide pulley frame properly as much as possible to make the pulley rotation more flexible. The chain specification form shall conform to the design specification. The connecting plate and the shaft will not be cracked and deformed, and the transmission should be flexible and reliable.

Changes in patterns and numbers will affect many aspects such as handling teams.

The manufacturers and after-sales service capabilities of different models are different, and the number of manufacturers is also different. For example, the low-rotation three-way stacking fork and the high-speed three-way stacking fork are the same narrow aisle forklift series, which can be stacked and taken out in a narrow aisle (1.5~2.0 meters).