Before all maintenance work on the diesel forklift trucks, be sure to do the following steps, including: place the forklift on the floor plan, and know that it is not easy to move suddenly, fully learn to put down the fork, turn off the forklift and pull out the key, then Press the emergency stop button.

Repair work as required must be carried out on a case-by-case basis, for example: cleaning the forklift, repairing or replacing old or damaged parts, etc.

The cleaning frequency of the forklift is determined by the natural environment of the forklift. If the forklift comes into contact with strongly irritating chemicals, such as salt water, organic fertilizers, chemicals, concrete, etc., be sure to thoroughly clean it after each use. When cleaning, you need to use pressurized gas, cool water and detergent. The body can be cleaned with wet wipes. Auto gasoline products or water solutions cannot be used for cleaning without pointing the faucet directly at the faucet, as the chemical can damage electronic components or plastic parts.
Before replacing the forklift light bulb, first check whether the fuse is in good condition, and determine whether the replaced light bulb and the damaged light bulb are the same model and specification. The operating procedures in the instruction manual should be during the replacement process.

The first thing to know when replacing forklift boots is when to restock. For airtight tires, when the tire tread thickness is equal to or less than 1.6mm, it should be given and replaced. This damage measurement is marked by a line marked by the manufacturer on the side of the tire. For example, a forklift truck is suitable for muddy roads. When the thickness of the tread pattern is less than millimeters, it should be replaced in time.

In order to maintain the reliability of the forklift, the two tires that must be on the same axle must be replaced with the same tires of the same manufacturer, which is essential for safe practical operation.
Use a lifting device to lift the forklift until the tire to be replaced completely leaves the road; in addition, when other tires are being replaced, place an object under the wheel that stays on the road to prevent the forklift from dragging.

When changing tires, the air should be expelled before taking out the tire to be replaced.

In addition, there are many types of batteries used on forklifts, which involves the maintenance and maintenance of forklift-related batteries. Proper battery usage includes proper battery charging, proper replacement, and more. Everyone must charge the battery in accordance with the forklift battery's instruction manual and charge it according to the instruction manual. If there is insufficient charge, the battery life will be shortened. Always wear goggles and rubber gloves when you use the battery, and turn off the charging head before disconnecting the battery. Use caution when using batteries.

Except for one part of the on-time maintenance work, which can be completed by enterprise technicians, the others must be actually operated by the employees of the after-sales maintenance service department of the forklift dealer.

After certain working hours (10h, 50h, 100h, 200h, 500h and 1000h), corresponding maintenance work should be carried out