During operation, you must strictly follow the safety regulations. The specific operation is as follows: first insert the key into the electric lock hole, release the handbrake, press the horn by hand, send a start signal, check the foot brake, and then start the loader to enter the working area. The control methods of lifting and tilting the bucket are different for various models. The loader driver must concentrate his mind at work to prevent safety accidents. When the driver pulls out the key and prepares to leave the car when parking, he must tighten the handbrake. The driver must also do a good job of daily maintenance of the heavy duty loader, for example, frequently check whether the gap of the brake pads is appropriate, inject butter, tighten the screws, and the internal combustion engine loader should also frequently check the oil level of the engine oil, check whether the hydraulic system is intact, and do a good job of daily cleaning. In addition, the loader driver must learn the cause analysis and troubleshooting methods of common faults, understand the maintenance time and maintenance items of the loader, and keep the equipment in the best working condition.
3 Ton Wheel Loader generally have two forward gears, one reverse gear, and one parking gear. It is similar to the gear position of an automatic car!
The loader also has several operating levers, one for bucket lifting and lowering, and one for bucket flipping. Start loading soil with the forward gear, put the bucket flat on the ground, and slowly drive forward. When the soil enters the bucket, use the operating lever to flip the bucket mouth upwards, so that the soil is loaded in the bucket. Then use the lifting lever to raise the bucket, put the gear into reverse gear, and then use the forward gear to slowly drive to the front of the car trunk! Note! The car trunk should be placed horizontally, and the loader bucket should be in the middle position directly above the car trunk. Then use the flip lever to turn the bucket mouth to the bottom, and then use the reverse gear to reverse at a safe distance from the car and put down the bucket and flip it flat on the ground.