How can front wheel loader tires be used properly?
(1) The front and rear axles of general construction machinery should be inspected regularly and accurately positioned so that they are parallel and perpendicular to the frame longitudinal beams. If the parallelism of the two axes is too poor due to loose U-bolts, broken leaf springs, loose wheel hub bearings, frame deformation, etc., it will change the normal position of the tire, causing the tire to slide when rolling, thereby increasing wear. When brake parts are worn, broken, or deformed, if the brake parts are not properly maintained, braking deviation or braking drag will occur, causing the tires to slip during rolling, causing abnormal wear.

(2) Use special tools when disassembling tires correctly, and do not hit the outer tires and rims with a heavy hammer. The rim, pressure ring, and locking ring must be intact. Rusty rims will cause water leakage in this part. Deformed or welded rims will lose dynamic balance. When the vehicle is running at high speed, impact vibration and severe wear will occur, which will reduce the fatigue strength of the curtain. , which may cause a tire blowout. When installing tires, the inner tube, outer tire and tire pads should be clean and dry, and a layer of talcum powder should be evenly applied on the inner surface of the outer tire, the outer surface of the inner tube and both sides of the tire pads.